COLLAPSING KATANA – INUYASHA – (PRINT IN PLACE + ASSEMBLY VERSION)

3D model description
Inuyasha, prints in place with No Supports

PRINT IN PLACE VERSION + ASSEMBLY VERSION

For the PRINT-IN-PLACE version, the blade is flat at the tip so it can stick to the build plate, if you want the pointed blade, you need to choose 1 of the other 2 versions

The blade is thin, so you need to fix it very well to the buildplate. I recommend using RAFT plate Adhesion.

If you are going to print the “print in place” version, I recommend that you test print the file “blade_print_test.stl” before printing the complete katana.
It works better when you leave the seams on the back of the blade.

Katanas are between 95 and 99 cm long, depending on how far you push the blades. Katana hilt 24.5cm + Blade 68.5/73.5cm

If you liked this one check my other designs:

Prints well in PLA
For a strongher Print i recommend using PLA+ / PLA850
Nozzle: 0.4mm